12V AE150 Car Auto Current Tester Multimeter Lamp By Fuse 23A Measurement Range 0.01A~19.99A
12V AE150 Car Auto Current Tester Multimeter Lamp Car Repair tool By Fuse Diagnostic Tool 12V 23A Measurement range 0.01A~19.99A
Description :
Car Auto Current Tester Multimeter Lamp Car Repair Automotive Electrical Multimeter Auto Fuse Tester Diagnostic Tool AE150 12V
|
Measurement range |
0.01A~19.99A |
|
Max Load |
20A/48Vdc for max.10 secs |
|
Accuracelectrical circuity: |
±(2% of reading + 2 digits) |
|
Fuse typePower Supply |
standard |
|
Power Supply |
12V 23A |
|
Operating Condition |
Temperature 0°C~40°C, relative humidity<75% |
|
Storage Condition |
temperature -10°C~50°C, relative humidity<80% |
The tester can be used to measure current at the fuse box of standard blade fuse. It is ideal for fault finding on automotive or commercial vehicle electrical circuit. Its feature is quick measurement and high accuracy. It is very easy to use and it can check the current through the fuse of the car.
Features
Ideal for fault finding on automotive or commercial vehicle electrical circuit
Easy to use
Quick measurement and high accuracy
Measurement range: 0.01A~19.99A
Max load: 20A/48Vdc for max.10 secs.
Powered by a 23A 12V battery (not include battery )
Operation Instruction
1.Turn off the vehicles’ engine.
2. Take out the fuse and put it in slot of the AE150. Please make sure the circuit protection is correct . (The detection fuse of the tester is 20A/48 V, standard type)
3. Insert the plug of the tester into the vehicle fuse socket.
4. If necessary, start the vehicle engine and energize the circuit first. Then turn on the detector by pressing the power switch
5.Under test, operate the circuit and the display will show the measured current.
6. Turn off the tester by pressing the power button again when you finish the measurement.
Packaging contents:
1x Auto Current Tester (not include batter )
