Festool 576799 LR 32 Hole Drilling Set In Systainer
Hole series are always drilled with a spacing of 32 mm and a hole diameter of 5 mm or 3 mm. The hole series drilling system is a complete set for fast and simple production of series of holes for shelf supports, rear wall supports and fittings with the OF 1010 or OF 1400 router. Everything in a single Systainer.
- Everything that you need for a series of holes at hand in one Systainer
- With the LR 32 system – comprising the guide rail FS 1400/2-LR 32 or FS 2424/2-LR 32 and the hole drilling system – precise rows of holes spaced 32 mm apart can be drilled with the Festool router
- The LR 32 guide rail is aligned quickly and parallel to the two side stops, which are positioned by means of an adjustable stop at the workpiece and guide rail
- The guide rail is precisely positioned with 9, 5, 16 or 32 mm edge clearance over the stopper in the longitudinal direction
- Centering mandrel for perfect centering of the router on the guide plate
- Spring-loaded positioning rocker for effective operation when drilling the hole series
- Perfectly guided through fine adjustment of the guide play and additional handle on the guide plate
- Properly secured thanks to the supplied guide rail clamps
- The most important hinge location cutters are already included in the set
- Guide rails required for use with the LR 32 System are available in 55″ or 95″ (sold separately)
Includes
- Guide plate w/ centering mandrel
- 2x Edge Stops
- 2x Linear Stops
- Pair of Clamps
- 35 mm Carbide-tipped European hinge boring bit
- 2 Carbide-tipped 5 mm shelf pin bits (one for through holes and one for stopped pin holes)
- 2x Longitudinal Stop
- All packed into SysGen3 M112 Systainer
